If you want that your home should remain cool in summer and warm in winter, then split air conditioning installation is the best option. Moreover, it is less costly than the ducted air conditioning installation. The duct ac installation is quite difficult and hectic. In this article, you will know how air conditioning installation agencies work. So following are the steps you should know while the work is going on.
Setting the indoor unit:
As we all know that the split ac has two units one is indoor, and the other is outdoor. So, the indoor unit should be placed on the wall in which a small hole can be made for passing the pipe to the outdoor unit. Hence, the first step in air conditioning installation. Although, this step is not done while the ducted air conditioning in Manly. Moreover, you must select a wall that does not face direct sunlight. This affects the performance of the ac. Hence, the floor ac should be installed 7 feet high, and no unit should have space around the ac.
Passing the wires from the hole:
While air conditioning installation you have to cut the wall with the help of the driller it must be 3 inches wide. And make sure that the hole is made in the downward direction for the easy drainage of water. Hence, in ducted air conditioning installation, you don’t have to do this step. After the hole is made pass the copper wire and drainage pipe to the outside. Make sure that the wires inside the indoor unit are properly fixed and is according to the diagram as shown in the instruction book. However, in a split air conditioning installation, there are two units to install, so when you are done with the indoor unit, now you can move to the outdoor unit.
Position of the outdoor unit:
It is obvious, while split air conditioning installation, the outdoor is at the back of the wall. Hence, place the unit at a distance of 12 inches from the wall. This will allow the outdoor unit to work properly. While in ducted air conditioning installation there is no such fatigue. For more information, please log on to https://platinumac.com.au/.
Connection of wires should be proper:
Place the outdoor on a form place like on concrete that reduces the noise and vibration. While split air conditioning installation you have to make sure that all the wires are connected with the outdoor unit properly. Although, the process involved in ducted air conditioning installation is different.
Conclusion:
In a nutshell, take care of each step and all the tricks that are mentioned in the article for the best performance. Moreover, split air conditioning installation is easy than ducted air conditioning installation.